Copper Wire Granulator model 600

Basic configuration:

1). 600 type crusher 1set.(37kW motor, 2 sets blades,material SDK-11.).

2). 1 set ofraw material conveyor(1.5 kW).

3).1 set of air-flow sorting shaker (1.5 kW ), with 200 mesh screen.

4).1 set of air suction / suction fans (4 kW ),1 set  of dust collection box.

5).1set of bottom wind fan (4 kW ).

6). 1 set of crushed material conveyor belt (0.75 kW).

7).1 set of  small vibrating screen forcopper particles secondary sorting  (0.18 kW, separable brass piece joint), 1 set of  small vibrating screen for plastic particles  secondary sorting (0.18 kW).  Measurement: L1.7*W0.6*H1.4(meters).

8). 1 set of water circulation cooling system (0.18 kW).

9). 1 set of copper particles  conveyor belt plus magnetic separator (0.75 kW).

10). 3  grinder  screens (one each with  holes diameter of 3-4-5 mm).

11). Total power:50.04 kilowatts, size:3.9 meters long *2 meters wide * 2.4 meters high.

Weight: about3 tons.  

Size of floor area after adding raw material conveyor belt:

7 meters long * 6 meters wide * 2.4 meters high.

12). Cable handling capacity: diameter0.5mm-20mm wire.

a).For copper with a content of less than 35% (for example, tricycle / motorcycle scrap line),200-350 kg per hour.

b).For copper content of 50% -70% (network cable as an example),350-500 kg per hour.

c).For copper containing 55% -70% (for example, communication line / car line),450-700 kg per hour.

d). For  cable wire cross-sectional area  over 1.5 mm²,600-800kg per hour.        

The purity of copper particles  was 99% , and the copper residue in plastic was three thousandths (3 ‰).